Accessories

Recloser, Controller and Load Break Switch Accessories

USB to RS232 Cable

USB to RS232 Cable

This cable provides a USB to RS232 port complete with a male DB9 connector.

USB to RS485 Cable

USB to RS485 Cable

This cable provides a 2-wire USB to RS485 port.

Ethernet to Fibre Modem

Ethernet to Fibre Modem

The Ethernet to Fibre Modem is designed to convert Ethernet networks to fibre networks by transparently converting Ethernet signals to optic signals.

4G/3G Dual Sim Ethernet Modem

4G/3G Dual Sim Ethernet Modem

 

The KIT-0052 is an industrial 4G/3G Ethernet modem to provide fast, reliable, “always on” wireless connection for RC10 communications requirements.

RS232 Single Mode Fibre Optic Modem

RS232 Single Mode Fibre Optic Modem

The Serial to Fibre Modem RC10 accessory is designed to convert Serial data to optic signals. Easy to install, offers a high speed electrically isolated communication over a long distance.

RS485 Isolator

RS485 Isolator

The RS485 isolator is used with the RS485 cable to provide up to 3.5kV of opto-isolation for incoming cables.

The Dual Remote HMI Unit

The Dual Remote HMI Unit

The Dual Remote HMI Unit is suitable for 19 inch rack mounting and houses two Human Machine Interfaces (HMI) designed for safe and easy operation.

USB to Ethernet

USB to Ethernet

This adaptor is used to provide an Ethernet port in the RC10 cubicle.

Ethernet Surge Protector

Ethernet Surge Protector

The surge protector is used to protect the Ethernet port from surges up to 5kA for incoming cables.

Wifi Router

Wifi Router

The WiFi Router is used with the Ethernet to Wireless adaptor to provide an outdoor wireless access point for connection to the RC10 cubicle. It has a weather proof housing and can be used with an external antenna if required.

IO MODULE

IO MODULE

Up to two Input Output (IO) modules can be supplied with the RC cubicle as an option. Each I/O module has eight opto–coupled inputs and eight voltage free contact outputs with normally open and normally closed contacts.

RC10 Distribution System Automation (DSA) Simulator

RC10 Distribution System Automation (DSA) Simulator

The NOJA Power Distribution System Automation (DSA) Simulator demonstrates RC10 grid automation functionality.

Rack Mounted Test Set

Rack Mounted Test Set

The RC10 Rack Mounted Test Set has been custom designed to assist engineers with bench testing of reclosers in protection and SCADA systems.

OSM Simulator

OSM Simulator

An optional RC10 OSM simulator is available for testing purposes where an actual OSM recloser is unavailable.

Interface Test Set

Interface Test Set

The interface test set provides an interface for secondary injection from Power System Simulators.

Demonstration Unit

Demonstration Unit

The RC10 Demo Unit is used primarily for training and demonstration purposes. It can also be used to test SCADA connections using RS232, USB and Ethernet ports. The unit includes a Panel and Relay mounted in a sturdy case. Supplied complete with power adaptor suitable for 110/220V AC input.

Pole Mounting Brackets

Pole Mounting Brackets

OMB-17 and OMB-18 Combined Pole Mounting Brackets are used to mount both the VT and OSM15, OSM27 or OSM38 reclosers to both wooden and concrete poles. It is constructed out of structural grade steel with a hot-dip galvanized finish.

Voltage Transformers

Voltage Transformers

Pole mounted outdoor voltage transformer complete with mounting bracket and accessories. These VTs are designed to supply our control cubicle with LVsupply where a local LV supply is unavailable.

Single Phase Voltage Transformers

Single Phase Voltage Transformers

These Single phase VTs are designed to supply our control cubicle with LV supply where a local LV supply is unavailable.

NOJA Power Bushing Terminals

Bushing Terminals

There are multiple options for bushing terminals on NOJA Power's OSM Recloser Product.

NOJA Power bird guards

PVC Bird Guards

Custom designed and manufactured BGD-06, BGD-03 and BGD-02 PVC Bird Guards.

SMF-01 Substation Mounting Frame

SMF-01 Substation Mounting Frame

The Substation Mounting Frame is designed to fit all OSM reclosers and control cubicles. It is used in conjunction with OMB-18 Pole mounting Bracket.